Video scenes shots:
Watch the video:
Other videos by this author:
 |
Pulse Motor (Fast Motor Explosive Results) 048 Posted by: kubikop
Video duration: 151 seconds Well its fast....... Bang... Lesson: Do not use tape to hold fast stuff together...... Related: bang, batteries, battery, charge, circuit, fast, motor, neon, pulse |
 |
Pulse Motor (Double Charging 01) 040 Posted by: kubikop
Video duration: 275 seconds Charging Battery A & Battery C at the same time. Im thinking of trying this with two 9v batteries that are not rechargeable to see how long the motor will run for. So far the figures are only going up. Related: batteries, battery, bridge, capacitor, charging, circuit, motor, neon, pulse, rectifier, reed, switch |
 |
Pulse Motor (Variable Resonance Whilst Spinning) 047 Posted by: kubikop
Video duration: 176 seconds You can change the frequency of the resonance while its spinning, sounds great! Related: batteries, charging, coil, motor, pulse, resonance |
 |
Pulse Motor (More Coils Needed) 051 Posted by: kubikop
Video duration: 179 seconds Showing the whole outside of the rotor can generate power out. Hopefully if I fill the outside with coils it wont slow down the rotor. Related: back, battery, charging, fast, fixed, fly, generate, motor, out, pulse, very, voltage |
 |
Water Battery (With Lemon Juice) 004 Posted by: kubikop
Video duration: 383 seconds My Water Battery With Lemon Juice Instead! Any THoughts Welcome....... ;-) Related: acid, alarm, battery, clock, copper, galvanized, home, juice, lemon, made, nails, power, water, zinc |
 |
Tesla Turbine (Test Enclosure) 02 Posted by: kubikop
Video duration: 110 seconds I have drilled 4 Exit holes and have temporary mounted it in an old CD Spindle for proof of concept test. The air enters the gaps between the disks and spirals towards the center gaining speed as it does. Related: boundary, concept, enclosure, layer, proof, tesla, test, turbine |
 |
Pulse Motor (Newman 03) 094 Posted by: kubikop
Video duration: 97 seconds A Quick look into the Newman Pulse Motor and how it works. I am trying to make the whole motor out of salvaged Parts. Related: magnet, magnets, motor, newman, pulse, www.pulsemotor.co.uk |
 |
Pulse Motor (Fixed Test 2) 050 Posted by: kubikop
Video duration: 173 seconds Yet more Tape...... Is there nothing it cant fix Does anyone know how to measure the RPM on this? Related: back, battery, charging, fast, fixed, fly, motor, pulse, very, voltage |
 |
Pulse Motor (Magnetic Flux) 032 Posted by: kubikop
Video duration: 92 seconds I made a compass out of 7 Ball Magnets and found it quite interesting at the speed that it span. Much faster than the rotor was spinning! I wonder if you could put an air coil beneath it to capture the Current? You would need to slow the rotor down to the frequency of the fastest spin in the secondary magnets....... Related: back, coil, flux, fly, magnetic, motor, pulse, secondary |
 |
Pulse Motor (30 Minute Charge) 052 Posted by: kubikop
Video duration: 397 seconds 3 Videos cut to show 30 minutes charge. Related: back, battery, charging, fast, fixed, fly, generate, motor, out, pulse, very, voltage |
 |
Pulse Motor (Newman 04) 095 Posted by: kubikop
Video duration: 79 seconds A Quick look into the Newman Pulse Motor and how it works. I am trying to make the whole motor out of salvaged Parts. Related: magnet, magnets, motor, newman, pulse, www.pulsemotor.co.uk |
 |
Pulse Motor (Smaller Scale) 066 Posted by: kubikop
Video duration: 102 seconds I am waiting for more Magnet Wire and thought I would try another motor on a smaller scale with a windup torch and some bits out of an old monitor. TIP122 transistor, a ferrite spindle and a neon out of a monitor. Some reed switch magnets and a reed switch. The coil and spindle from a windup torch. Related: 9v, battery, magnets, motor, pulse, reed, switch, torch, transistor, up, wind, windup |
 |
Pulse Motor (New 4 Coil HD Idea) 018 Posted by: kubikop
Video duration: 83 seconds I will get a torc drive set tommorrow and Build this. I can put the top back on the HD once assembled to make sure the magnets do no kill me....lol The one in the last video shed its Magnets at high speed and splatted them up the walls, be warned if you are reproducing these videos...... Related: back, coil, emf, generator, magnet, magnetic, motor, pulse |
 |
Pulse Motor (Bedini Circuit Problems) 026 Posted by: kubikop
Video duration: 87 seconds Does anyone know why Im getting my coil to hum? and the neon is always flickering on? The resistor is 680 Ohms, 2N3055 and a 1N914 Diode Related: back, bedini, circuit, coil, emf, magnet, motor, pulse |
 |
HHO Generation (Bubbler) 003 Posted by: kubikop
Video duration: 137 seconds I was thinking that the bubbler and the HHO Plates could be housed inside the gas tanks of a model airplane. The bubbler will be fine as it is but the tank that the plates will go in will have to be cut in two and glued back together. I will be using a gravity fed oiler that will drip into the normal air inlet of the cox engine. Slowly getting to the testing stage..... Related: bicarbonate, bubbler, cad, cox, engine, fed, feed, fuel, generation, hho, motor, oil, soda, stainless, steel, stroke |
